8mm, NAVIGATION / LANDING LIGHTS FOR RC AIRPLANE 


 

This kit will contain 6, High intensity LED's. 4, 8mm, 1W,  LED lights and 2, 5mm, 1/2W, LED with 7mm frenzel lenses. All lights are pre-wired with 48" length wires and operate on 4.8Vdc. 

The kit contains:
2, 8mm, White - 140 deg, 230,000 mcd (950 lumens) ea.
1, 8mm, Red - 140 deg, 200,000 mcd (830 lumens)
1, 8mm, Green - 140 deg, 220,000 mcd (910 lumens)
1, 5mm, Red - flashing, 60 deg, 10,000 mcd (41 lumens)
1, 5mm, White - flashing, 60 deg, 20,000 mcd (83 lumens)
2, 7mm, clear frenzel lenses
Each LED is pre-wired with 48" length of twisted wire.
Total current draw - 250Mah
Instructions for operation and using on different voltages.

 

                                                                LED spec/demo page

You may have noticed that I was able to turn the lights on and off by using my transmitter. See my other auctions for the RC Servo switch.

You will find navigation lights on Ebay and in catalogs. Most  light kits will cost you upwards of $40.00 for navigation lights that are not as bright.

I also offer 5mm LED Nav lights that are great for smaller planes like the Park Zone Super cub and Mini Cub, etc....

Each light set is guarantied for life against defective workmanship. MADE IN USA


Larry Barnes
www.spudgun.com/led.htm