STROBE MODULE KIT V1.10mm
This kit will contain 2, 10mm, High intensity LED's, 1, strobe module
All lights are pre-wired with 48" length wires and operate on 5.0Vdc at 100Mah..
The kit contains:
1, 10mm, White - 380,000 mcd (950 lumens)
1, 10mm, Red - 280,000 mcd (830 lumens)
1, Strobe module
Each LED is pre-wired with 48" length of twisted wire.
Instructions for operation and use with our RC servo switch
The BRIGHT lights you see in this demo are what you get in this kit. You can install them on your airplane, helicopter, boat or car.
You may have noticed that I was able to turn the lights on and off by using my transmitter. See my other auctions for the RC Servo switch..
I also offer 5mm and 8mm LED Nav lights that are great for smaller planes like the Park Zone Super cub and Mini Cub, etc....
Each strobe kit set is guarantied for 90 days against defective workmanship. MADE IN USA