This kit will contain 6, High intensity LED's and 1, strobe module. .All lights are pre-wired with 48" length wires and operate on 4.8Vdc. 

The kit contains:
3, 10mm, White - 380,000 mcd
2, 10mm, Red - 280,000 mcd
1, 10mm, Green - 400,000 mcd
1, Strobe module
Each LED is pre-wired with 48" length of twisted wire.
Total current draw - 250Mah
Instructions for operation and using on different voltages.


The below demo is showing the new 10mm LED Nav/Strobe kit. 

                                                                LED Demo

The BRIGHT lights you see in this demo are what you get in this kit. You can install them on your airplane, helicopter, boat or car.

You may have noticed that I was able to turn the lights on and off by using my transmitter. See my other auctions for the RC Servo switch.

Before you buy, checkout my feedback for these items and other that I offer.

I also offer 5mm and 8mm LED Nav lights that are great for smaller planes like the Park Zone Super cub and large scale airplanes.

Each light set is guarantied for 90 days against defective workmanship. MADE IN USA

Larry Barnes