newgun2.JPG (22029 bytes)

Making wads for the TP launcher.

Wads can be made by using plastic containers. Many type are Cottage Cheese, Yogurt, Butter etc. The pictures below will show how to make the wads for the launcher.


plug1.jpg (11509 bytes)

Start with a plastic container that is larger than the barrel size.


plug2.jpg (12233 bytes)

Push the container into the barrel and cut off the excess container.


plug3.jpg (12855 bytes)

After the wad is cut remove and turn upside down (open end goes in the barrel first). push the wad all the way to the bottom of the barrel.

Now you are ready to place your projectile, toilet paper, water, gravel, small grapes, apples anything that will fit in the barrel. Depending on what you are shooting the wad should last 2 or 3 shots before splitting.

Copyright (c), 1997 - 2008

Back to TP launcher page